If you have all the tabs pressed in, this should be pretty easy. Grab your flat head screwdriver and insert it in the middle of the case. blog/09-28-2020/how-to-shuck-a-western-digital-easystore-or-elements-external-drive/įlip the enclosure on end without moving the cards. Again, pay attention to where the cards are poking out so that you can stand the enclosure on an end. Try to angle your cards in a way that we can eventually stand the enclosure on end without disturbing the cards that are holding the tabs.Īfter you get 2 tabs, flip the enclosure on the other side and insert 2 more. Grab another card and repeat the last 2 steps. It may take some wiggling but youll know when you get it pressed in. Once you have the card at the front of the middle of the tab, push the corner of the card in. Pull back slightly so that it isnt removed but you are able to get around the side edge of the tab. It’s easiest to go for one of the spots that has an opening and then slide it over to where the tab is. We need to push all of these tabs in at the same time to get the case to slide off. It’s important to note that the tabs are not in the same spot on both sides. This will help you understand what you are looking for.
HOW TO FORMAT WD EASYSTORE HOW TO
How To Remove Drive From Western Digital Easystore Or Elements Enclosureīefore we get started, it’s best that you see one of these enclosures after it has been opened. You should also grab a flat head screw driver. You will NEED these if you do not have them.Īfter you’ve acquired one or a few of those, you want to grab any unused/expired IDs, credit cards or library cards.
They are cheap compared to their raw counterparts. What You Needįirst, you will need either one of these external drives.
After about 3 months I will probably throw the enclosures away. In my experience, if a drive fails it will do it fairly soon after it is put into use. This was necessary in case the drive failed. I documented the process I went through to get these drives out of the enclosures without breaking anything. The problem is that these drives are not meant to be removed by consumers. Shucking a drive is the act of removing the drive from it’s enclosure. They are cheap compared to buying the bare WD Red drive which makes them a prime target for shucking. For those that don’t, these enclosures contain what most people suspect are relabled WD Red drives. If you are familiar with the data hoarder community, you almost certainly already know about shucking Western Digital Easystore or Elements enclosures.
HOW TO FORMAT WD EASYSTORE UPGRADE
It was time to upgrade but I didn’t want to spend a fortune. I loved the new cameras but my recordings were being overwritten too soon. After liking the Amcrest doorbell, I grabbed 2 of these Amcrest PTZ 12x Zoom Cameras and replaced some of my Hikvision cameras with these 4K Amcrest Cameras. I finally replaced my Ring doorbell with this Blue Iris compatible Amcrest Doorbell Camera.
Recently I realized that the NAS I use for Blue Iris didn’t have enough storage. Removing The Drive From A Western Digital Easystore Or Elements Enclosure This never affects the price that you pay but helps with costs to keep the site up and running.
This post contains affiliate links, which means I earn money from purchases.
0 kommentar(er)
